Automation and Control Engineering Technology (W, N)
Automation and Control Engineering Technology is an instructional program that provides the student with the technical knowledge and skills necessary for gaining employment as an automated manufacturing systems technician in maintenance diagnostics, engineering, or production in an automated manufacturing environment. The program is offered on the Wesson Campus or Natchez Campus. The focus of this program is on electricity/electronics, fluid power, motors and controllers, programmable controls, interfacing techniques, instrumentation, and automated processes. Many of our recent graduates are now employed at impressive businesses like Nissan Canton, Georgia-Pacific, Grand Gulf, Sanderson Farms, Entergy, and more!
This curriculum is designed as a two-year technical program. Graduates of the program will be qualified to seek employment as entry-level electronics, instrumentation, robotics, automation, and maintenance technicians. Students who graduate from the program will also be better prepared to continue their education in advanced-engineering related fields.
Special Admission Requirements
- Minimum ACT composite of 14
- Meet requirements for Intermediate Algebra
Additional Information
Construction Equipment Operation (W)
The Construction Equipment Operation Program is designed to prepare an individual for an entry-level position in the field of construction equipment operations. This program is offered on our Wesson Campus. Practical and theoretical experiences are provided in the classroom and on the following equipment: backhoe, front end loader, dozer, motor grader, and excavator. Students will receive national certification through the NCCER curriculum.
The Construction Equipment Program offers two levels of completion:
- Certificate Level I: Students must complete all courses in the First Semester.
- Certificate Level II: Students must complete the First and Second Semester courses.
Median loan debt incurred by graduates: $3,600
Additional Information
Electrical Technology (W)
The Electrical Technology program is offered on the Wesson Campus and prepares individuals to install, operate, maintain, and repair electrical systems. These systems include residential, commercial, and industrial wiring, motor controls, and electrical distribution panels. The program offers extensive hands-on training in electrical troubleshooting and the development of problem-solving skills in industrial electrical procedures, programmable logic controllers, and process control.
Special Admission Requirements
- Must have a minimum ACT composite score of 14
- Must meet requirements for Intermediate Algebra
Additional Information
Electronics Engineering Technology (W)
Electronics Engineering Technology on the Wesson Campus is a multifaceted program that provides exposure to electronics and electrical disciplines, communications systems, micro-controllers, and programmable controllers. It is the largest branch of engineering technology. EET is a challenging two-year technical program offering a combination of theory in the classroom and hands-on applications in the laboratory.
Students learn to analyze and diagnose electronic/electrical circuits and systems with multi-function meters (multimeters), oscilloscopes, spectrum analyzers and many other industry standard devices. Soldering techniques including surface-mount and hot-air are covered and students prototype modern printed circuit boards on a CNC milling machine. The program also utilizes the latest engineering software including National Instruments MultiSim, Ultiboard, LabVIEW, and ETCAI virtual troubleshooting.
Graduates of the EET program receive an Associate of Applied Science Degree and are qualified for high-paying entry-level employment in a wide range of fields: electronics, biomedical, communications, robotics, electrical, manufacturing, maintenance, offshore, instrumentation and control, computers, audio/video entertainment, aerospace and more. Students may also continue their education in EET at a university.
Special Admission Requirements
- Minimum ACT composite of 14
- Meet requirements for Intermediate Algebra
If you would like to visit the campus, tour our facilities, or talk with the instructors, please contact us:
Carey Williamson, Program Coordinator and Instructor / carey.williamson@colin.edu / 601.643.8350
Brian Turnage, Instructor / brian.turnage@colin.edu / 601.643.8430
Additional Information
Heating and Air Conditioning Technology (W & N)
Heating, Ventilation, Air-Conditioning, and Refrigeration Technology is a postsecondary instructional program that prepares individuals to work in engineering departments or private firms installing, maintaining, and operating small or medium air-conditioning, heating, and refrigeration systems. Instruction prepares individuals to work in a commercial setting performing special tasks relating to designing ductwork, assembly, installation, servicing, operation, and maintenance of Heating, Refrigeration, and Air-Conditioning Engineers, Inc., Air-Conditioning Contractors of America (ACCA), Air-Conditioning Heating Refrigeration Institute (AHRI), and others. Included are air-conditioning, heating, and refrigeration devices; equipment, techniques, and systems; and maintenance and operation of these systems. This program is offered on our Wesson and Natchez campuses.
Industry standards referenced are from the National Center for Construction Education and Research. Upon completion of the technical certificate or Associate of Applied Science Degree, students will be prepared to complete the following nationally recognized industry certifications.
- NCCER Core Curriculum
- NCCER Heating, Ventilation, Air-Conditioning, and Refrigeration Technology Level 1 & 2
- Environmental Protection Agency 608 Universal Certification
Books and Supplies
- Books:
- First semester: $300
- Second semester: $119
- Third semester: $119
- Fourth semester: $119
For a complete listing of college fees and expenses, click here.
Median loan debt incurred by graduates: $2,950
Occupational Information
This program prepares students for the following occupations. The links provide information on each occupation including but not limited to job tasks, skills, job zone, and education. This information is provided by the O*NET program which is the nation’s primary source of occupational information.
- 49-9021.00 Heating, Air Conditioning, and Refrigeration Mechanics and Installers
- 86 49-9021.01 Heating and Air Conditioning Mechanics and Installers
- 66 49-9021.02 Refrigeration Mechanics and Installers
Co-Lin HVAC Graduates
- Placement of graduates: Wesson- 71.40%, Natchez 66.70%
Additional Information
Precision Machining Technology (W)
Precision Machining Technology is an instructional program on the Wesson Campus that prepares individuals to shape metal parts on machines such as lathes, grinders, drill presses, and milling machines. Included is instruction in making computations related to work dimensions, testing, feeds, and speeds of machines; using precision measuring instruments such as layout tools, micrometers, and gauges; machining and heat-treating various metals; and laying out machine parts. Also included is instruction in the operation and maintenance of computerized equipment.
Books and Supplies
- Books:
- First semester: $850
- Second semester: $400
- Third semester: $400
- Fourth semester: $400
- Supplies and other costs:
- Career-Technical Fee: $200
For a complete listing of college fees and expenses, click here.
Median loan debt incurred by graduates: $2,250
Occupational Information
This program prepares students for the following occupations. The links provide information on each occupation including but not limited to job tasks, skills, job zone, and education. This information is provided by the O*NET program which is the nation’s primary source of occupational information.
- 51-4033.00 Grinding, Lapping, Polishing, & Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- 89 51-4034.00 Lathe and Turning Machine Tool Setters, Operators, & Tenders, Metal and Plastic
- 85 51-4032.00 Drilling and Boring Machine Tool Setters, Operators, & Tenders, Metal and Plastic
- 80 51-4111.00 Tool & Die Makers
- 51-4035.00 Milling and Planing Machine Setters, Operators, & Tenders, Metal and Plastic
- 76 51-4041.00 Machinists
Additional Information
Welding (W, N, S)
The Welding program is offered on the Wesson Campus, Natchez Campus, and at the Simpson County Center. The program is designed to prepare the student for employment and advancement in an occupation that requires knowledge and skills of welding. The student receives instruction in construction type welding, x-ray welding for shipbuilding, construction, maintenance and custom shop welding. Instruction will include a study of welding equipment and safety practices. The student is taught welding using various electrodes: Shielded Metal Arc welding, Gas Metal Arc welding, oxyacetylene welding, Gas Tungsten Arc welding, Flux Core Arc welding, pipe welding, and Plasma Arc Cutting.
The Welding Program offers two levels of completion:
- Certificate Level I: Students must complete all first semester courses
- Certificate Level II: Students must complete the first and second semester courses
Occupational Information
This program prepares students for the following occupations. The links provide information on each occupation including but not limited to job tasks, skills, job zone, and education. This information is provided by the O*NET program which is the nation’s primary source of occupational information.
- 51-4121.00 Welders, Cutters, Solderers, and Brazers
- 51-4121.06 Welders, Cutters, and Welder Fitters
- 51-4121.07 Solderers and Brazers
Median loan debt incurred by graduates: $2,430
